Safety Instructions - Stanley PC500 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
6
5
3
4
6 (unitED KingDOM MODEl)
PC500EU_Manual_040512.indd 2-3
7
1
2
2
InstructIon Manual
Please refer to and observe all safety instructions before use.
To comply with the published safety standards, the following must be considered when using this inverter:
1. For information technology equipment and office equipment use only.
2. The output power drawn from the inverter must not exceed the given rating.
3. Please keep this equipment free from humidity.
Intended use
Your power inverter is designed to convert direct current (dc) to alternating current (ac). It allows the 12 Vdc current
in an automobile to supply ac power to operate equipment that is normally supplied from a mains power source. This
product is intended for consumer use only.

safety InstructIons

WARning:
When using battery-powered appliances, basic safety precautions, including the following, should always
be followed to reduce the risk of fire, leaking batteries, personal injury and material damage.
8
• Read all of this manual carefully before using the appliance.
• The intended use is described in this manual. The use of any accessory or attachment or the performance of any
operation with this appliance other than those recommended in this instruction manual may present a risk of personal
injury.
• Retain this manual for future reference.
using your inverter
Always take care when using the inverter.
• This appliance is not intended for use by young or infirm persons without supervision.
• For indoor or in-car use only.
• Do not allow the appliance to become wet.
9
• The appliance is not to be used as a toy.
• Use in a dry location only.
• Do not open body casing. There are no user-serviceable parts inside.
• Do not operate the appliance in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
• To reduce the risk of damage to plugs and cords never pull the cable to remove the plug from a socket outlet.
after use
• When not in use, the appliance should be stored in a dry, well ventilated place out of the reach of children.
• Children should not have access to stored appliances.
• When the appliance is stored or transported in a vehicle it should be placed in the boot or restrained to prevent
movement following sudden changes in speed or direction.
• The appliance should be protected from direct sunlight, heat and moisture.
Inspection and repairs
• Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches
and any other conditions that may affect its operation.
• Do not use the appliance if any part is damaged or defective.
• Have any damaged or defective parts repaired or replaced by manufacturer.
• Never attempt to remove or replace any parts other than those specified in this manual.
specific safety instructions for power inverters
WARning:
This appliance converts power from a 12 Vdc battery to 230 Vac mains supply voltage. Take precautions,
including the following, to avoid the risk of electric shock.
• Only connect a plug fitted to the supply cord of an appliance to the inverter.
• Never connect an appliance by modifying the plug or by using an adapter unless otherwise instructed by this
instruction manual.
• The length of an appliance power cord to the inverter must not exceed two metres unless otherwise instructed by this
instruction manual.
• Never connect an appliance that is damaged or incomplete.
• Never connect the inverter to the mains supply or to the output of another inverter.
- The inverter cannot convert the mains supply to a dc voltage.
- The inverter cannot be used to supplement the mains supply.
• Disconnect the 12 Vdc accessory plug from the power source and remove the appliance plug from the inverter before
performing any maintenance or before cleaning the appliance.
• Do not cover the inverter. Only use in well ventilated areas.
3
EnglisHn
4/5/2012 6:10:20 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido