Yamaha RX-V359 Manual De Instrucciones página 30

PLAYBACK
Displaying information about the input
source
You can display the format, sampling frequency, channel
and bit rate of the current input signal.
1
Press one of the input selector buttons on
the remote control to select the desired input
source.
2
Press STRAIGHT to select "STRAIGHT".
STRAIGHT
3
Press u / d to display the following
information about the input source.
28
FORMAT
Signal format display. When this unit cannot detect a
digital signal, it automatically switches to analog
input.
Display status:
Analog, Digital, Dolby Digital, DTS, PCM,
Unknown Digital
Note
"Unknown Digital" appears when this unit detects any
undecodable digital signal.
CHANNEL
Number of source channels in the input signal (front/
surround/LFE). For example, a multi-channel
soundtrack with 3 front channels, 2 surround
channels and LFE, is displayed as "3/2/LFE".
SAMPLING
Sampling frequency.
Display status: 32kHz, 44.1kHz, 48kHz, 64kHz,
88.2kHz, 96kHz
BITRATE
Bit rate.
y
When you are displaying information about the input source, this
unit is in the "STRAIGHT" mode (see page 33). To turn back the
sound field program on, press STRAIGHT again.