Troubleshooting - Yamaha RX-V359 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 283
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized
YAMAHA dealer or service center.
General
Problem
This unit fails to turn
The power cable is not connected or the
on or enters the
plug is not completely inserted.
standby mode soon
The protection circuitry has been
after the power is
activated.
turned on.
This unit has been exposed to a strong
external electric shock (such as lightning
or strong static electricity).
No sound
Incorrect input or output cable
connections.
No appropriate input mode has been
selected.
No appropriate input source has been
selected.
Speaker connections are not secure.
The front speakers to be used have not
been selected properly.
The volume is turned down.
The sound is muted.
Signals this unit cannot reproduce are
being input from a source component,
such as a CD-ROM.

TROUBLESHOOTING

Cause
Connect the power cable firmly.
Make sure that all speaker wire connections on this
unit and on all speakers are secure and that the wire
for each connection does not touch anything other
than its respective connection.
Set this unit to the standby mode, disconnect the
power cable, plug it back in after 30 seconds and then
use it normally.
Connect the cables properly. If the problem persists,
the cables may be defective.
Select an appropriate input mode.
Select an appropriate input source with INPUT
l / h on the front panel (or the input selector
buttons on the remote control) and MULTI CH
INPUT on the front panel (or MULTI CH IN on the
remote control).
Secure the connections.
Select the front speakers with SPEAKERS on the
front panel.
Turn up the volume.
Press MUTE or VOLUME +/– on the remote control
to resume audio output and then adjust the volume.
Play a source whose signals can be reproduced by this
unit.
TROUBLESHOOTING
Remedy
See
page
11
13-17
26
23, 25
11
23
25
49

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido