RECORDING
Recording adjustments and other operations are performed from the recording components. Refer to the operating
instructions for those components.
Notes
• When this unit is set to the standby mode, you cannot record between other components connected to this unit.
• The settings of TONE CONTROL (see page 24), VOLUME, speaker levels (see page 26) and the sound field programs (see page 31)
do not affect recorded material.
• The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.
• Digital signals input at the DIGITAL INPUT jacks are not output at the analog AUDIO OUT (REC) jacks for recording. Therefore, if
your source component is connected to provide only digital signals, you cannot record the source.
• A given input source is not output on the same OUT (REC) channel.
• Check the copyright laws in your country to record from CDs, radio, etc. Recording of copyrighted material may infringe copyright
laws.
y
Do a test recording before you start an actual recording.
If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture
itself may be disturbed due to those signals.
STANDBY
ON
PRESET TUNING
FM AM
A B C D E
EDIT
STRAIGHT
PROGRAM
PHONES
SPEAKERS
A B OFF
EFFECT
TONE CONTROL
BASS
TREBLE
SILENT CINEMA
DVD
2
CD
TUNER
STANDARD
TEST
PROG
LEVEL
34
RECORDING
VOLUME
FREQ
TEXT
EON
PTY SEEK
MODE
START
PRESET
TUNING
MEMORY
TUNING MODE
NEXT
SET MENU
MAN'L AUTO FM
AUTO MAN'L
INPUT
INPUT MODE
MULTI CH INPUT
2
DTV/CBL VCR
POWER
MD/CD-RV-AUX MULTI CH IN
A/B/C/D/E
PRESET
5CH STEREO NIGHT
SLEEP
STRAIGHT
VOLUME
PROG
MUTE
SET MENU
VOLUME
1
Turn on all the connected components.
2
Press INPUT l / h on the front panel
repeatedly (or press one of the input selector
buttons on the remote control) to select the
source component you want to record from.
INPUT
Front panel
3
Start playback on the selected source
component or select a broadcast station.
4
Start recording on the recording component.
DVD
DTV/CBL VCR
or
CD
MD/CD-RV-AUX
TUNER
Remote control