Displaying The Radio Data System Information - Yamaha RX-V359 Manual De Instrucciones

Displaying the Radio Data System
information
Use this feature to display the 4 types of the Radio Data
System information: PS (program service), PTY (program
type), RT (radio text) and CT (clock time). The
corresponding indicators light up in the front panel
display.
Notes
• You can select one of the Radio Data System modes only when
the corresponding Radio Data System indicator lights up in the
front panel display. It may take a while for this unit to receive
all of the Radio Data System data from the station.
• You can select only the available Radio Data System modes
being offered by the station.
• If the signals being received are not strong enough, this unit
may not be able to utilize the Radio Data System data. In
particular, the "RT" mode requires a large amount of data and
may not be available even when the other Radio Data System
modes are available.
• In case of poor reception conditions, press TUNING MODE
(AUTO/MAN'L) on the front panel so that the AUTO indicator
disappears from the front panel display.
• If the signal strength is weakened by external interference while
this unit is receiving the Radio Data System data, the reception
may be cut off unexpectedly and "...WAIT" appears in the front
panel display.
• When the "RT" mode is selected, this unit can display the
program information by a maximum of 64 alphanumeric
characters, including the umlaut symbol. Unavailable characters
are displayed with the "_" (underscore).
• If the reception is cut off when the "CT" mode is selected, "CT
WAIT" appears in the front panel display.
STANDBY
ON
PRESET TUNING FM AM A B C D E
EDIT NEXT
STRAIGHT PROGRAM
PHONES SPEAKERS
A B OFF
EFFECT
TONE CONTROL BASS TREBLE
SILENT CINEMA
Press FREQ/TEXT repeatedly to select the
desired Radio Data System display mode.
FREQ
PS PTY
Frequency display
• Select "PS" to display the name of the Radio Data
System program currently being received.
• Select "PTY" to display the type of the Radio Data
System program currently being received.
• Select "RT" to display the information on the Radio
Data System program currently being received.
• Select "CT" to display the current time.
RADIO DATA SYSTEM TUNING
VOLUME
FREQ TEXT EON
PTY SEEK
MODE START
PRESET TUNING MEMORY TUNING MODE
SET MENU MAN'L AUTO FM AUTO MAN'L
INPUT
INPUT MODE MULTI CH INPUT
FREQ/TEXT
TEXT
RT CT
43