Blatchford Javelin JAV22L1S Instrucciones De Uso página 11

8 Cutting Pylon to Length
5
Remove socket, place fitting clamp in the vice
and cut blade to length. Fit shoulder screws to
prevent damage to components
7
Deburr end of pylon.
9
Loctite (243) & tighten (25 Nm) top housing bolts.
Attach and align socket.
(continued)
6
Drill two 8.1mm diameter holes through drill
bushes.
8
Slide pyramid into top housing (or fit preferred
alignment option).
10
4
25 Nm
If a foam cosmesis is to be fitted, roughen the
top surface of the foot shell to provide a bonding
surface. Bond foam cosmesis to upper surface of
the foot shell using Thixofix adhesive (926204) or
equivalent and shape to suit.
11
938306SPK1/1-0121