Tabla de contenido
Publicidad
Capítulo 31: El Creador de Aparatos (Fixture Builder)
1.
Select the function cell for a blank DMX Entry of channel 9 and press
Set
2.
Select Beam on the left column to display a list of Beam function sub-
categories.
3.
Select Gobo as the desired function. The window will close and you
will see Gobo assigned as the function and feature for channel 9. Note
the feature column will auto-fill with 'slots'. Select this cell and press
Set
4.
Select the DMX value cell for this DMX Entry and press
DMX range values for the gobo spin according to the DMX protocol
(100>200) and press
5.
Select the Real World value cell for this DMX Entry and press
the Real World value to be displayed in RPM (-100>100rpm) and press
Enter
6.
Repeat the above steps for the random spin portion of the protocol
using another DMX entry for channel 9.
Strobe/Control Channel
The number of DMX entries needs to be increased for this channel:
1.
Select the Channel cell for channel 10.
2.
Press the New DMX Entry button to add an additional DMX entry for
channel 10.
3.
Repeat the above until there are 8 channel entries for this channel.
Define each DMX entry for Strobe:
1.
Select the function cell for a blank DMX Entry of channel 10 and press
Set
Flying Pig Systems
. A dialog will appear with a list of function categories.
. Choose Spin from the dialog box.
.
Enter
.
. A dialog will appear with a list of function categories.
Appendices
. Enter the
Set
. Enter
Set
353
Publicidad
Tabla de contenido
Solución de problemas
