Updating Receivers - Nice MG3000 Manual Completo

11.1 UPDATING RECEIVERS

Tap the "UPDATE RECEIVERS" option in the "ADVANCED MENU 1/2". When
selected, the "UPDATE RECEIVERS" function immediately starts transferring
the list of device records (database) from the MG3000's memory to all receivers
connected via the CAN network.
Up to 8 receivers of each type can be connected to a single MG3000. When
any changes are made to the registration of a device, deletion or inclusion of
a new device, it will be necessary to carry out the procedure for updating the
receiver(s). During the update, the response received from each Receiver will
be displayed.
Figure 11.1.a
Figure 11.1.b
- ENGLISH -
246
43