Sub-Zero Designer Serie Guía De Uso Y Cuidado página 14

Installation
Completion
KICKPLATE INSTALLATION
The kickplate must be removable for service. The floor
cannot interfere with removal. Finger-tighten the adjust-
ment bracket nuts. Refer to the illustration below. Make
in-and-out adjustments, then wrench-tighten the bracket
nuts. Install the kickplate with the provided screws.
A decorative kickplate can be attached to the factory-
installed kickplate. The three rows of vented louvers
cannot be covered.
To install a decorative kickplate, remove the paper backing
from the magnets and attach the decorative kickplate to
the magnets. The magnets allow the decorative kickplate
to be removed if necessary.
KICKPLATE
ADJUSTMENT
Kickplate adjustment
14 | Sub-Zero Customer Care 800.222.7820
MAGNET
SCREW
Kickplate installation
WARNING
Follow all city and state laws when storing, recycling,
or discarding unused refrigerators and freezers.