Listening To Music - Eclipse CD5030 Manual Del Usuario

Pausing the music
1 Press button [1].
The music being played is paused.
ATTENTION
Press button [1] to start playing the music.

Listening to music

1 Press the [SOURCE/PWR] button
for less than one second. Press
the button several times, until the
Bluetooth audio mode is displayed.
2 Press button [1].
The connected Bluetooth-compatible portable
device starts to play music.
The Bluetooth audio function
English
Connecting the main unit and the portable device
Press the [▲] button or the [▼]
1
button while in the BT Audio Setting
selection mode to select Connection.
2 Press the [ENTER] button.
The "Waiting" message appears on the
display.
ATTENTION
Press the [ /BAND] button to change the portable
device to be connected. The BT Audio Setting
selection mode is activated again.
ATTENTION
• If the portable device is not connected to the main
unit, its play function is disabled.
• If the portable device does not start playing, even
after you have pressed [1] button, press the Play
button on the portable device.
•
Bluetooth is a registered trademark of Bluetooth
SIG, Inc.
3
I nput the passcode using the
portable device.
The default setting value of the passcode is
1234.
ATTENTION
• For details on how to operate the portable device,
read its instruction manual.
• Be sure to perform the connection of the portable
device only while the "Waiting" message is on the
display.
4 When the connection has been
c o m p l e t e d , t h e " C O M P L E T E D "
message appears on the display.
The portable device is now connected to the
main unit. ( and ♪ appear on the display.)
If the connection has not been
s u c c e s s f u l l y c o m p l e t e d , t h e " F A I L E D "
message appears on the display.
ATTENTION
• If the portable device is still connected, disconnect it.
• If the connection has not been successfully
completed, and the "FAILED" message appears
on the display, connect the portable device again,
following the procedure from the BT Audio Setting
selection mode in Step 1.
• The passcode is a password used when connecting
the portable device to the main unit.
• When the audio of the cell phone is connected,
hands-free can be connected at the same time
for some devices. If you want to be able to use
the hands-free function, perform the hands-free
connection procedure again.
• D e p e n d i n g o n t h e t y p e o f p o r t a b l e d e v i c e ,
connection may not be possible.
13