Making A Call - Eclipse CD5030 Manual Del Usuario

Making a call using preset dial
Calls can be made using the phone numbers stored
to the preset dial buttons.
1 Press the [ /MENU] button.
Press a preset dial button between
2
[1] and [6].
The phone number and name stored in the
selected preset dial button appear on the
display, and the number is dialed (two beeps
will be heard if no phone number is stored).
The Bluetooth hands-free function
English

Making a call

This function enables you to dial phone numbers from the main unit, or to make calls using the stored phone
numbers (phonebook) and incoming/outgoing call history.
ATTENTION
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Making a call by dialing a phone number
Calls can be made by dialing phone numbers from the main unit.
Before dialing a phone number directly from the main unit, set Dial Setting of the Phone Setting selection
mode to ON.
For details, refer to the ECLIPSE Website given below and download the operation manual.
(URL:www.eclipse-web.com/us-index.html)
1 Press the [ /MENU] button.
2 Press the [MODE/TAG] button
repeatedly until the "Dial Input" is
displayed.
3 Press the [▲] button or the [▼]
button to input numbers between 0
and 9.
[▲] :
Increases the number.
[▼] :
Decreases the number.
Press the [ ] button or the [
4
button to move the cursor.
[ ] :
The cursor moves to the right.
[ ] :
The cursor moves to the left.
5 Repeat the Steps 3 and 4 to input
the phone number.
ATTENTION
A maximum of 28 digits can be input per phone number.
If you input an incorrect number, move the cursor to that
number, and input the correct number by following Step 3.
Press the [ENTER] button when you
6
have input the phone number.
The input number confi rmation screen appears
on the display.
7 Press the [ENTER] button.
The input phone number is dialed.
]
19