Tare Function; Units Selection; Counting Mode - Baxtran BAP Serie Manual De Instrucciones

4.2.3 TARE FUNCTION

Press TARE key to subtract the current displayed weight value as the tare weight value (Consecutive
tare operations are permitted). The NET symbol appears and the display will show a net weight of the
object to be weighted.
Then take off the container, the display will show a minus "-" weight value which equals to the container's
weight.
ELIMINATE THE TARE WEIGHT
To eliminate the tare weight by pressing
Note:
1. When performing the tare operation(s), make sure the instrument is in stable.
2. If consecutive tare operations have been performed, to clear the tare value, please remove all the
containers on the pan first and then press
3. Tare range is the full capacity of balance for all models.

4.2.4 UNITS SELECTION

Press key to choose the weighing units and the display will be changed to the new value with the
units shown. There are up to 13 units of weight that can be enabled. Refer to Parameter Set-up Section.

4.3 COUNTING MODE

In normal weighing mode, press
sample size:
8
Key with no object on the scale.
key.
key to enter into counting mode, and the display shows the
USER MANUAL BAP EN EN