Technical Data - Gtec Saturn Manual Del Usuario

CPS Models
INPUT STAGE
Nominal voltage
Nominal frequency
Accepted input voltage tolerance due to no
intervention of the battery (referred to 400Vac)
Accepted input frequency tolerance due to no
intervention of the battery (referred to 50/60Hz)
Cut-in threshold in Emergency Only mode and for
EOS
Cut-in time in Emergency Only mode
Input current harmonic distortion
Input power factor
Power Walk In mode
OUTPUT STAGE
(2)
Nominal voltage
(3)
Nominal frequency
Nominal apparent output power
Nominal active output power
Output power factor
Short circuit current
Precision of output voltage (referred to a 400Vac
output voltage)
(4)
Static stability
Dynamic stability
Voltage harmonic distortion with linear and
normalised distorting load
Crest factor allowed with nominal load
Frequency precision in free running mode
Inverter overload (Vin>345V AC )
Bypass Overload

TECHNICAL DATA

CPS 20
380-400-415 Vac 3-phase with neutral (4 wire)
Programmable from 1 to 125 sec. in steps of 1 sec.
380/400/415 Vac 3-phase with neutral (4wire)
20kVA
18kW
120% Infinite, 130% 10 min, 160% 1 min
130% Infinite,160% 60 minutes, 180% 10 minutes
114
CPS 30
50-60Hz
 20% @ 100% load
-40% +20% @50% load
 20%
40-72Hz
- 20% of nominal voltage
< 300ms
THDi  3 %
(1)
 0.99
50/60Hz
0,9
1,5 x In for t > 500ms
 1%
 0.5%
 3% resistive load
(5)
 1% with linear load
 3% with distorting load
3:1
0,01%
30kVA
27kW