Breguet 5817 Instrucciones De Uso página 5

5817
"M " ,
ARINE WATCH
The crown has four positions:
1. Secured position
2. Winding position
3. Rapid date correction
4. Time-setting position
, -
BIG DATE SELF WINDING
Starting the watch
Release the crown by turning it down-
wards ( ) until it reaches position 2.
M
This position enables manual wind-
ing of the self-winding movement,
meaning winding by rotating the
crown upwards ( ), about 50 to 55
turns. Then, secure the crown by turn-
ing it upwards ( ). When worn on
the wrist, the watch is automatically
rewound. Fully wound, the watch will
continue to go for about 65 hours off
the wrist.
, -
WATER RESISTANT TO
Setting the time
Release the crown by turning it down-
wards (
Turn the crown upwards ( ) to move
the hands forwards to the date change
at midnight. Then set the watch to the
desired time by moving the hands for-
wards. (Please note: if you set your
watch during the afternoon, you must
first move the hands past noon). For
accurate time-setting, ensure that the
last operation was done in a clock-
wise direction. Push the crown back
to position 2 and secure it by turning
it upwards ( ).
4
10 (100
BAR M
), then pull it to position 4.
M
)