Data Transmission Via Bluetooth - Fora D30 Manual Del Usuario

Data transmission via Bluetooth

Step 1
Install Software.
Download the Health Care System Software and instruction manual
provided on FORA ' s website: http://www.fora.com/usa to your com-
puter. Follow the instruction manual to install the software on your
computer.
Step 2
Connect the monitor to PC.
With the monitor turned off, press
of the monitor. " PCL " will appear on the display and the Bluetooth
indicator on the right-hand corner will blink, indicating the monitor is
ready for transmission.
Step 3
Data transmission.
Follow the instructions provided in the software to transmit data (re-
sults and the corresponding dates and times). The blue indicator will
start blinking, indicating the monitor is transmitting your results onto
the PC. Press
Make sure your PC has Bluetooth before transmitting the data and the moni-
tor is within the receiving range.
and the monitor will turn off.
(For FORA D30f only)
to initiate the data transmission
NOTE
49