CASUALPLAY s-twinner Manual De Instrucciones página 15

UNFOLDING (illustrations 1-5)
• Release the safety catch (Fig.1).
• Unlock the safety latch (Fig.2).
• Slide the buttons on both sides of the handlebar to release the opening mechanism
(Fig.3).
• Unfold the chassis by pulling the handlebar upwards (Fig.4).
• The front wheels are released and automatically lock into place. Check they are correctly
fastened.
• Make sure that the safety fastener is in the correct position. It clicks into place (Fig.5-
6).
FITTING THE FRONT WHEELS (illustration 7)
• Insert the axle of each wheel set into the slots of the chassis (A). When the axle has
been inserted, press the lower button (B) and push until it clicks locked. Check that the
two wheel sets are securely fastened into place.
LOCKING THE FRONT WHEELS (illustration 8)
• To lock the swivel function of the front wheels, press the buttons between the two wheels
downwards.
• To unlock the wheels, press the button upwards.
PARKING BRAKE FUNCTIONING (illustration 9)
• To activate the brake press the button situated between the rear wheels.
• Raise the button to take the brake off.
WALKING BRAKE FUNCTIONING (illustration 10)
• The walking brake lever is situated on the upper right-hand side of the handlebar.
• Press the lever to stop the pushchair and release it to continue moving.
FITTING AND REMOVING THE ARMRESTS ON THE SEAT (illustrations 11-13)
• Insert the ends of the armrests into the front slots on the seat (Fig.11-12).
• To remove the armrests (Fig.13), individually press both of the side buttons on the lower
front part of the armrests (1) and pull (2).
FITTING THE SEAT (illustrations 14-16)
• Put the parking brake on.
• Insert the connectors into the two front and rear side slots (Fig.14-15). Make sure that
the green mark appears in the window to indicate it is correctly fastened (Fig.16). The
child can now be placed in the seat.
INSTRUCTIONS FOR USE
13