Kohler K-6536 Guia De Instalacion página 10

Laminate Installation
1/8" (3mm)
Sealant
Sink
Backsplash
2" (5cm) Min.
Cabinet
Support Frame
Solid Surface/Tile-In Installation
1/8" (3mm) Countertop
Sealant
Sink
Backsplash
Support Frame
Cabinet
7. Undercounter Installation
CAUTION: Risk of personal injury or product damage. Cast
iron sinks are very heavy. Get help lifting the sink into place.
Verify that the sink will fit in the cabinet opening. If necessary,
sand the opening or add wood filler strips.
Install the faucet to the sink according to the manufacturer's
instructions.
Install the strainer or garbage disposal to the sink according to
the manufacturer's instructions.
Apply a 1" (2.5cm) spot of sealant at each corner of the frame
where it will contact the sink.
NOTE: If using shims, additional sealant will be needed.
Carefully position the sink within the frame, making sure to
center the sink in the cabinet.
Verify that the sink is level. The top of the sink should be flush
with the top of the cabinet to allow proper countertop
installation. Adjust or shim between the sink and support if
needed.
Apply sealant in the spaces between the sink and the cabinet and
along the sides and back of the sink.
Determine the countertop cut-out shape and size.
1019951-2-A
Countertop - Laminate
Three sides
Sealant
Mortar or Adhesive
Water Resistant
Underlayment
10
Sealant
Front Support
Frame Member
Kohler Co.