Tm-Cu Installation In The Existing Vehicle Configuration; Vehicle Configuration For The Ccp; Vehicle Configuration For The Control Head - Airbus TETRAPOL MOBILE Instrucción De Instalación

TETRAPOL Mobile - Control Unit - Hardware Installation Handbook
5.1.2

TM-CU installation in the existing vehicle configuration

E
5.1.2.1

Vehicle configuration for the CCP

N
To use the TM-CU in a configuration equipped with system cable HG4354 for the CCP,
adapter cable HG5619 is used to connect the TM-CU to the system cable.
G
L
I
External accessory
S
H
Figure 5.2 TM-CU INSTALLATION DIAGRAM (VEHICLE CONFIGURATION FOR THE CCP)
5.1.2.2

Vehicle configuration for the Control Head

To use the TM-CU in a configuration equipped with system cable HG5114 for the Control
Head, adapter cable HG5620 is used to connect the TM-CU to the system cable.
External accessory
Figure 5.3 TM-CU INSTALLATION DIAGRAM (VEHICLE CONFIGURATION FOR THE CH)
This document and its contents are the property of Airbus DS SLC and must not be copied or circulated without authorisation.
Any usage outside the subject expressly specified is prohibited. Copyright
10/19
TM-CU
Adapter cable
HG5619
System cable
HG4354
BER
TM-CU
Adapter cable
HG5620
System cable
HG5114
BER
08/2019
Voice accessory
External LSs
Antenna
Voice accessory
External LSs
Antenna
©
2015 - 2019 - Airbus DS SLC - All rights reserved.
IH - PS11760AQLAB01
UDT
UDT