Introduction; Purpose; Audience; Reference Documents - Airbus TETRAPOL MOBILE Instrucción De Instalación

TETRAPOL Mobile - Control Unit - Hardware Installation Handbook
1

INTRODUCTION

E
1.1

PURPOSE

N
This handbook describes how to install the control device for mobile and fixed radio
G
terminals: TETRAPOL Mobile - Control Unit (TM-CU).
L
It gives the various TM-CU installation options:
I
• In vehicle configuration (dashboard or DIN car radio mounting)
S
• On a desktop
H
• For an update of existing BER 4M and BER 3G configurations
This handbook contains:
• A description of the kits
• Network characteristics
• Safety instructions
• The installation procedure
• The startup and shutdown procedures
This document is applicable as from the phase defined in Document [0] (see Section 1.3).
1.2

AUDIENCE

This handbook is for installers of the various configurations and for users.
1.3

REFERENCE DOCUMENTS

[0] Referential of the Operating Documentation
PSXXXXX (according to the project)
[1] TPM900 Vehicle Configuration Installation Handbook
PS11825
[2] TM-CU - User Manual
PS11758
There may be Technical Bulletins accompanying this document and the documents above.
See Document [0] for their references.
This document and its contents are the property of Airbus DS SLC and must not be copied or circulated without authorisation.
Any usage outside the subject expressly specified is prohibited. Copyright
2/19
©
2015 - 2019 - Airbus DS SLC - All rights reserved.
08/2019
IH - PS11760AQLAB01