Kohler K-3091 Guia De Instalacion página 3

Before You Begin (cont.)
• (2) connecting blocks
• (1) door latch
• (6) polyset anchors
• (6) #10 x 2" screws
• (10) #10 x 1/2" screws
Model K-3091 does not include end caps; you need a separate
end cap kit for this model.
Establish and install all plumbing rough-ins in the correct location
before beginning installation of the mirrored cabinet. Use a 90°
shut-off valve with 3/8" compression outlet.
Do not complete the finished wall until all needed plumbing and
electrical rough-ins have been completed.
NOTE: The mirrored door functions as a service access for the
electrical components and faucet. Use the sliding drawer for storage
access.
Observe all local plumbing and building codes.
Kohler Co. 3 1012595-2-A