Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Loosen screw
and slide hinge
assemble out
Hinge
Assembly
1. Assemble the Cabinet
Remove the screw from the hinge as illustrated. Slide the door
and hinge off the cabinet and store them in the cabinet box. Make
sure all of the door edges are protected.
Lay the cabinet on its back on a flat surface.
NOTE: No more than three cabinets should be secured together
prior to installation.
If combining multiple cabinets, lay the cabinets side-by-side. Note
the hole locations in the cabinets. These are used to secure the
connectors and side kits.
Use two connecting blocks for each cabinet addition. Assemble
the cabinet to the connecting blocks from the inside of the cabinet
with #10 x 1/2" thread cut screws.
Kohler Co.
5
1012595-2-A
Publicidad
Tabla de contenido
