Failure Display And Inspection - EAS ELECTRIC EMIH600-FX1 Manual De Instrucciones

Pans do not become hot
and appears in the
display.
The induction hob or a
cooking zone has
turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically alternating
with one or two digits in
the cooking timer
display).

8. Failure Display and Inspection

The induction hob is equipped with a self diagnostic function. With this test the technician is able to check
the function of several components without disassembling or dismounting the hob from the working
surface.
Troubleshooting
Problem Possible causes
F1-F6 Temperature sensor failure
F9-FA
Temperature sensor of the IGBT failure.
FC
The connection between the display
board and the main board is fail
E1/E2 Abnormal supply voltage
E3/E4 Temperature sensor of the ceramic glass
plate is high
E5 Temperature sensor of the IGBT
is high
Specific Failure & Solution
Failure
The LED does not
come on when unit is
plugged in.
The induction hob
detect the pan because it is not
suitable for induction cooking.
The induction hob cannot detect
the pan because it is too small for
the cooking zone or not properly
centred on it.
Technical fault.
Problem
No power supplied.
The accessorial power
board and the display
board connected failure.
The accessorial power
cannot Use cookware suitable for induction
cooking. See section 'Choosing the right
cookware'.
Centre the pan and make sure that its
base matches the size of the cooking
zone.
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
What to do
Please contact the supplier.
Please contact the supplier.
Please contact the supplier.
Please inspect
supply is normal.
Power on after the power supply is
normal.
Please restart after the
induction hob cools down.
Please restart after the
induction hob cools down.
Solution A
Check to see if plug is
secured tightly in outlet
and that outlet
working.
Check the connection.
Replace the accessorial
20
whether power
Solution B
is
V.2