Before Locating The Fixing Brackets; Adjusting The Bracket Position; Cautions - EAS ELECTRIC EMIH600-FX1 Manual De Instrucciones

The isolating switch is easily accessible by the customer.

9.4 Before locating the fixing brackets

The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the
controls protruding from the hob.

9.5 Adjusting the bracket position

Fix the hob on the work surface by screw 4 brackets on the bottom of hob(see picture) after installation.
Adjust the bracket position to suit for different table top thickness.
HOB
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after
installation (see picture)

9.6 Cautions

The induction hotplate must be installed by qualified personnel or technicians. We have professionals at
your service. Please never conduct the operation by yourself.
The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes
dryer, as the humidity may damage the hob electronics
The induction hotplate shall be installed such that better heat radiation can be ensured to enhance its
reliability.
The wall and induced heating zone above the table surface shall withstand heat.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
A steam cleaner is not to be used.
TABLE
BRACKET
A
.
HOB
BRACKET
B
24
TABLE
V.2