After Installing The Hob, Make Sure That; Before Locating The Fixing Brackets; Adjusting The Bracket Position - EAS ELECTRIC EMIH320-3F Manual De Instrucciones

ceramic tiles) for the wall surfaces surrounding the hob.

9.3 After installing the hob, make sure that

• The power supply cable is not accessible through cupboard
doors or drawers.
• There is adequate flow of fresh air from outside the cabinetry
to the base of the hob.
• If the hob is installed above a drawer or cupboard space, a
thermal protection barrier is installed below the base of the hob.
• The isolating switch is easily accessible by the customer.

9.4 Before locating the fixing brackets

The unit should be placed on a stable, smooth surface (use the
packaging). Do not apply force onto the controls protruding from the
hob.

9.5 Adjusting the bracket position

Fix the hob on the work surface by
screw 2 brackets on the bottom of
hob (see picture) after installation.
Adjust the bracket position to suit for
different table top thickness.
43
V.1