Epson SureColor F7170 Guía De Actualizaciones Y Alineación página 22

| Adjusting the Take-up Reel
22
Make sure all four of the mounting screws are loose. To make adjustments, use the large hexagon
9.
wrench to turn the adjustment screw counterclockwise to move the line back, and turn it clockwise to
move the line forward. The line will move approximately 1 mm with each turn of the screw. Continue
to turn the silver adjustment screw until the measurements are the same.
Fully tighten all four of the screws on the right bracket to secure it in place.
10.