Epson SureColor F7170 Guía De Actualizaciones Y Alineación página 25

Note the location where the alignment tool crosses the front of the white line on the platen.
15.
Lift up the alignment tool and slide it to the other side of the printer, next to the right adjustment
16.
guide. Line up the alignment tool and the adjustment guide at the front and back of the printer.
Note the location where the alignment tool crosses the front of the white line on the platen. If the
location is different from the left side, go to step 17. If they are the same, go to step 20.
Adjusting the Take-up Reel |
25