Cleaning The Appliance; Removing And Installing The Metal Grease Filter; Cleaning The Metal Grease Filter - Gaggenau VL 414 712 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning the appliance

Note: Before cleaning, remove any jewelry from your
arms and hands.
In order to ensure the grease absorption level, the grease
filter must be cleaned regularly.
Clean the appliance after each use once it has cooled
down. Remove spilt liquids immediately and do not allow
any food remains to dry on it.
Also clean the inside of the downdraft ventilation
regularly with a damp cloth.
Appliance
Recommended cleaning
part/surface
Appliance
Soapy water – dry with a soft cloth.
frame
Use a minimal amount of water when
cleaning to prevent water from pene-
trating the appliance.
Soak dried-on food remains with a
small amount of soapy water; do not
scour.
Ventilation
Carefully remove for cleaning. Soapy
grille
water – dry with a soft cloth.
You can also clean the ventilation
grille in the dishwasher. This may
cause the ventilation grille to discolor,
making it lighter. This does not affect
its usability.
Control knob
The soapy cloth must not be too wet.
Dry with a soft cloth.
9
CAUTION
Damage to the appliance
Do not detach the control knobs
to clean them.
Cleaning and maintenance
Removing and installing the metal
grease filter
1.
Remove the ventilation grille.
2.
Pull the metal grease filter up and out of the
appliance.
3.
Clean the metal grease filter and the ventilation grille.
4.
Clean the inside of the downdraft ventilation.
5.
Insert the metal grease filter.
6.
Place the ventilation grille on top.

Cleaning the metal grease filter

9
WARNING
Risk of fire!
Grease deposits in the grease filter can ignite.
Clean the grease filter at least every two months or as
often as necessary.
Never operate the appliance without the grease
filter.
The metal grease filter can be cleaned in the dishwasher
or by hand.
en-us
25

Publicidad

Tabla de contenido
loading

Tabla de contenido