Setting Up The Device; Installation Accessories; Wall Mounting - Beko BHCA 64640 B Manual De Usuario

5

Setting Up the Device

WARNING!
A
Before starting the installation,
read the safety information on
User Manual.
WARNING!
Failure to install with screws and
A
stabilizers in accordance with
these instructions may result in
electric shock.
For the installation of the hood, please
contact the nearest Authorized Service.
It is the customer's responsibility to prepare the
location and electrical installation of the hood.
5.1 Position of the Appliance
(Figure 6)
Distance between the cooker and the
•
cooker hood must be considered prior
to assembly. This distance should be 65
cm (Figure 6).
Distance must be measured from the
•
surface of grate for gas cookers,
from surface of glass for electric cook-
•
ers.
Cooker Hood / User Manual

5.2 Installation Accessories

12
1. Product
2. Inner Chimney
3. Outer Chimney
4. Chimney Connection Plate
5. User Manual
6. Assembly Pattern
7. 2x Ø6mm Plastic Dowel
8. 4x Ø8mm Plastic Dowel
9. 4x 4.8x50 Wall Mount Screw
10. 2x 3.9x22 Chimney Connection Plate
Screw
11. 4x 3.5x9.5 Chimney Connection Screw
12. Chimney Clamp
13. 150/120mm Plastic Chimney Adapter
14. Air Baffle
15. Plastic Adapter (Air Diverter)
The information required to make the lo-
cation suitable for the installation of the
hood is given below.

5.3 Wall Mounting

• Wall must be flat, straight and have the
sufficient bearing capacity.
13 14
11 / EN