Important Notes; Fitting Instructions - Ofa Bamberg Dynamics Guia De Inicio Rapido

Important notes

Wrist support
Dear user,
We are pleased that you have chosen a
product from Ofa Bamberg and would like
to thank you for putting your trust in us.
Please take a moment to read through this
product information carefully to ensure
optimum effectiveness of your Dynamics
product.
Ofa Bamberg wishes you a speedy
recovery!
←

Fitting instructions

The fitting instructions in pictures can be found on the fold-over
page at the beginning of the brochure.
1
To put on the wrist support, please open all Velcro fasteners. Pull the
support over the wrist in such a way that the hand and thumb opening
are pointing away from your body and the aluminium splint is on the
inside of the wrist.
2
To fix the position of the bandage, attach the separate Velcro tape to the
middle Velcro fastener and close it. Then lead the tape around the wrist
and close it.
3
Now close the other Velcro fasteners. Please ensure that the product is
secure but not too tight in order to prevent pinching.
6_OT14_OFA_545105051_Handgelenkstuetze_innen.indd 8
The Dynamics wrist support stabilises
the wrist by means of its compressive effect
and additional aluminium reinforcement.
The gentle compression encourages blood
circulation and reduces swelling rapidly.
Please note
– The initial adjustment and strap-
ping on of the product must be
carried out by qualified specialist
staff. The aluminium splint can
be moulded when cold.
– Wear the product directly on
your skin. If it has to be worn in
combination with other products,
then please discuss this in ad-
vance with your doctor.
– If you experience an unpleasant
sensation, intense pain or any
other problem when wearing the
product, then remove it and con-
tact your doctor or specialist sup-
plier.
– We use a comprehensive quality
management system to check our
products. However, should there
still be reasons for complaint,
please contact your specialist
supplier.
31.07.2014 15:11:43