Descargar Imprimir esta página

SPALDING M86724C El Manual Del Propietario página 28

Publicidad

SECTION C: APPLY HEIGHT AND MOVING LABEL & HEIGHT ADJUSTMENT
Apply height adjustment and moving label (46) to front of pole as shown.
1.
10 ft.
(3.05 m)
A. While holding handle, remove pin (24).
2.
B. Move elevator up or down to desired height.
C. Replace pin (24) full length to lock system at desired height.
ID# M6611541
02/07
46
WARNING!
DO NOT ALLOW
CHILDREN TO
ADJUST HEIGHT.
WARNING!
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
NOTE:
Peel protective
film from surface
of acrylic
backboard prior
to use.
B.
28
24
A.
C.

Publicidad

loading

Este manual también es adecuado para:

N53W24700