Fastening The Worktop; Installation Position - Fagor IF-800S-03-07 Manual De Utilización

C60T376A8.qxd 14/3/07 16:21 Página 6
3
FASTENING TO THE WORKTOP
A
Fit the hob into the space in the
unit pressing down well to close
the seal properly.
B
Fix the four hob plate hooks
underneath in the unit space cor-
ners.
4

INSTALLATION POSITION

There must be a current of fresh air to cool your induction hob's electronics circuits as
shown in the diagram.
40mm minimum
50mm
IMPORTANT
Installation must guarantee that fresh air can come from the rear and that a vent measu-
ring at least 5 mm allows the air to escape in the front part.
All manuals and user guides at all-guides.com
5mm minimum
Hob on oven
6
Hob on unit
50mm
5mm minimum