Remote Control - Faber IN-NOVA TOUCH Manual De Instrucciones

5. REMOTE CONTROL

(OPTIONAL)
This appliance can be commanded using
a remote control, powered by a CR2032
type 3 V battery (not supplied).
• Do not place the remote control near
heat sources.
• Do not discard the batteries with normal
containers.
Turns the motor On and Off.
-
Lights On / Off.
Enables/Disables the Intensive function.
-
Increases the working speed each time
it is pressed.
Decreases the working speed each time
it is pressed.
6. LIGHTING
• For replacement contact technical sup-
port ("To purchase contact technical
support").
7