Model # ___________Serial # ________________
Approximate Installation Time: 30 min. per unit (0.5 hrs.) depending on installer experience.
• 1/2" Ratchet Wrench
• (1) Saddle Box
• (1) Removable Tool Tray
• (2) Rubber Mounting Pads
Note: The rubber mounting pad comes as a single
piece and must be separated into two pieces, one for
each side of the truck.
Read and understand all instructions and warnings before operating or using this product.
Danger of explosion. Do not use this product for storing or transporting flammables, explosives, hazardous materials, or
hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and
cutting torches. This product is only intended and safe for use in storing and transporting small tools, equipment and
other similar materials. Any modifications made to, or unintended use of this product, could create a hazardous condition
that can cause death, serious personal injury or property damage.
OPERATORS MANUAL
RIDGID TRUCK STORAGE EQUIPMENT
WWW.RIDGID.COM
Model 4100
PRODUCT REGISTRATION
For your convenience, place
product registration tear-off
sticker here.
INSTALLATION TIME
TOOLS REQUIRED
PARTS LIST
-ATTENTION-
DANGER
1
MODELS 4100 & 4105
Purchase Date: _______________
Place of Purchase: ____________
Key Code: ___________________
• Ruler
3/8" Flat Washer
• (2) Keys
• (4) Fender Washers
• (4) Retaining Washers
5/16" Flat Washer
• (4) J-Bolts
• (4) Nylon Lock Nuts 5/16-18
#10 Flat Washer
Model 4105
M2XX
M2XX
All Reduced 85%
1/4-20 Nylon
Lock Nut
5/8" Floor Spacer
#10-24 Nylon
3/8" Floor Spacer
Lock Nut
#10-24 Serrated
#8-32 Nylon
Flange Nut
Lock Nut
Part No. 24-0289
SprntrNuts&Washers.eps
3/8" Flat W
1/4" Flat W
3/8" Lock
1/4" Lock W