Publicidad
Brake Control Wiring Harness
INSTALLATION INSTRUCTIONS
Note: This harness has been
designed for use with Valley
brake controls containing a
Direct Link™ harness conector
(Fig. 1).
controls, use Valley harness part number 30406.
1. Read instructions
thoroughly before beginning.
2. Locate the vehicles OEM brake
control connector under the dash
behind the hood release latch (Fig.
2). The connector will be similar
to that found on the Brake Control
Wiring Harness and designed
to mate with it (Fig. 3). Refer to
the vehicles owners manual for
additional information in locating
this connector.
3. Connect the brake
control wiring harness
to the brake control by
plugging the mating
connectors together. Ensure
Fig. 1
Fig. 1
Fig. 2
Fig. 4
Publicidad
