Publicidad
Idiomas disponibles
Idiomas disponibles
4
1
2
Scope of supply
1 x remote control
1 x wiring harness
1 x control unit
1 x adhesive tape
Mounting
1 Remove the seat
2 Dismount the central part of the storage compartment
3 Loosen the lower part of the storage compartment and tilt towards
the right
4 Dismount the left and right side covers
a Disconnect the turn signal
b Disconnect the tank ventilation hose
5 Loosen the side tank on the left, tilt towards the outside and fasten
6 Pull in the wiring harness
1
7 Remove the light mask and disconnect the headlight
8 Disconnect the red – white socket connector
the main wiring harness (on the instrument panel)
9 Connect the white and green cables from the alarm system wiring
harness to the red – white cables (between the disconnected socket
connector)
10 Connect the turn signal cable from the main cable harness (brown
and violet) to the matching connector from the alarm system cable
harness (yellow and black)
11 Run the alarm system wiring harness in the colors red, blue and
yellow to the right side of the motorcycle
-
600.12.036.000
-
-
1
for the alarm system
2
on the front left of
Publicidad
