Honda NXR125 BROS KS Manual Del Propietário página 149

70
1. Change the engine oil and oil strainer (page 45).
2. Lubricate the drive chain (page 52).
3. Empty the fuel tank into an approved gasoline
container, using a hand siphon or an equivalent.
Spray the inside of the tank with an aerosol rust-
inhibiting oil. Reinstall the fuel fill cap on the tank.
NOTE
If the motorcycle is to be stored for more than a
month, be sure to drain the carburetor to assure
engine proper performance after storage.

WARNING
Gasoline is extremely flammable and is explosive
under certain conditions. Perform this operation in
a well-ventilated area with the engine off. Do not
smoke or allow flames or sparks in the area where
gasoline is drained.
4. To prevent cylinder oxidation, perform the following:
• Remove the spark plug cap and plug.
• Pour a tablespoon (15 – 20 cc; 0.5 – 0.7 oz) of
clean engine oil into the cylinder and cover the
spark plug hole with a cloth.
• Crank the engine with the starter button several
times to distribute the oil and reinstall the spark
plug and cap.
5. Remove the battery. Store it in an area protected
from freezing temperatures and direct sunlight. Slow
charge the battery once a month.
6. Wash and dry the motorcycle. Protect all painted
surfaces by applying silicon-based wax. Apply
rust-inhibiting spray to the rims, spokes, shock
absorber, exhaust (also inner part) and other
chromed parts.
NOTE
Apply rust-inhibiting spray only with the cold engine.
The excess can be removed after 24 hours.

WARNING
Do not apply the rust-inhibiting spray to the area
close to the brake system.
7. Remove the water excess and lubricate the control
cables.
8. Inflate the tires to the recommended pressure. Place
the motorcycle on blocks to raise both tires off the
ground.
9. Cover the motorcycle with an appropriate cover. Do
not use plastic covers. Store it in a cool area, free
of dampness and with a minimum daily temperature
variation. Do not store the motorcycle in direct
sunlight.
Owner's Manual