Gallagher HR3 Instrucciones página 11

Screen
Country Code
Opera ng Mode
Total Number of
tags in memory
Opera ng Mode
There are two opera ng modes on the HR3 Reader:
• Memory mode - The captured Electronic ID tag data is stored in the Reader in sessions
un l it is transferred to computer using the MyScale Pro so ware.
• Non-Memory mode - The captured Electronic ID tag data is immediately sent out the
Serial port (via Bluetooth or cable) to a Scale or data logging device.
Memory counter
Applicable when in Memory mode only - Displays OFF when in Non-memory mode.
The Memory counter indicates the total number of Electronic ID tags stored in the HR3
Reader regardless of the number of sessions involved.
The HR3 Hand Held EID Tag Reader can store up to 5000 Electronic ID tags. When it reaches
5000, the counter is replaced with the word "FULL".
EID tag number
Displays the full 16 digit Electronic ID tag number of the last read tag. The fi rst 4 digits
iden fy the country code or the manufacturer. The last 12 digits iden fy the individual
animal.
The HR3 Reader can be confi gured to display the last 5, 6 or 7 digits of the EID tag number
in a larger format, temporarily replacing the number of tags read. The length of me that
a large format EID tag displays can also be confi gured as either 5, 10 or 30 seconds. See
"Opera onal Se ngs" in the SmartReader Confi gurator Help.
EID tag number
Number of tags read
in current session
Ba ery icon
11