Gallagher HR3 Instrucciones página 20

Memory Counter
The Memory counter is only applicable when in Memory mode.
Once the memory is full, the Memory counter displays FULL. Note
however that even when the memory is full, if a new EID tag is
read the number of tag reads in the current session s ll increases
(in the example shown, 28 is the number of tag reads).
Note: Once the memory is full in Memory mode, each me you read a new EID tag, by
default, the oldest EID tag data is deleted and the newest EID tag data is stored. This can
be changed using the 'Overwrite' se ng in Confi gurator. For further details refer to the
SmartReader Confi gurator Help.
The Memory counter is returned to 0 by downloading tag data using MyScale Pro.
For further details refer to the MyScale Pro Help.
Session Limit
The HR3 Reader has a session limit of 100. While the current
session number cannot be iden fi ed, if you reach the session limit
the following screen displays:
If this occurs, you should immediately download the sessions using
MyScale Pro. However, you can con nue to read and store tags to
the current session, providing there is suffi cient space within the
current session, or it has been confi gured to allow this. Refer to the
SmartReader Confi gurator Help.
Non-Memory mode op ons
Zero count
Single-Click the trigger to reset the number of tags read in the current session.
Only applicable when in Non-memory mode.
20