Gallagher HR3 Instrucciones página 22

The Bluetooth icon displays on the Reader main screen if connec on
is made between the Reader and the Bluetooth to RS232 adaptor, or
Bluetooth to USB adaptor.
3. Test the connec on between the Scale and the Reader, see Tes ng
the connec on between Scale and HR3 Hand Held Reader (p 23).
Note: If you are connec ng to a computer or other data logging device you need to have
so ware running (not supplied) to collect the Electronic ID tag data.
Data and power cable to Scale
1. Plug the Data and power cable into the cable connector on the HR3 Hand Held Reader.
Cable connector
Data and
power cable
2. Plug the Data and power cable DB9 into the Scale.
On a Gallagher Scale connect to Port 2.
3. Turn on the Gallagher Scale.
4. Set up the Gallagher Scale to receive the Electronic ID tag data. See Se ng up the Scale
(p 21).
Note: If you are connec ng to a computer or other data logging device you need to have
so ware running (not supplied) to collect the Electronic ID tag data.
22
DB9 connector