Gallagher HR3 Instrucciones página 8

Bluetooth to
USB device
Tag Buff er
Electronic ID tag
number
Antenna
Ac vate the HR3
Reader
Double-Click
Memory mode
Non-memory
mode
Read period
Scale
Scan for tags
Single-Click
8
Connected to the USB port of a computer and receives the tag data
sent by the HR3 Reader.
Receives the Bluetooth communica ons from the Reader and passes
the informa on onto a computer for deciphering.
(Note: This is not supplied, but is an op onal extra.)
A temporary storage area in memory for tag data.
The Electronic ID tag number is the electronic code in an ear tag that
can be scanned to recognise an individual animal.
Contains the aerial used to capture Electronic ID tag data.
Turn on the Reader ready for use. The screen turns on and allows you
to select various user op ons.
Two quick successive clicks of the Reader trigger.
The captured Electronic ID tag data is stored in the HR3 Reader in
sessions un l it is transferred to computer using the MyScale Pro
so ware.
The captured Electronic ID tag data is immediately sent out the Serial
port (via Bluetooth or cable) to a Scale or data logging device.
The me the HR3 Reader is ac vely scanning for Electronic ID tags.
Once the read period ends the Reader antenna is turned off . Default
me is three seconds. This me can be altered. See the SmartReader
Confi gurator Help.
A digital weighing display unit that detaches from loadbars and
connects to your computer.
Turn on the HR3 Reader and single-click the trigger.
This ac vates the antenna and makes it ready to read Electronic ID tag
data once the tags move within the reader range.
A single click of the HR3 Reader trigger.