Wiseup WIFI40 Manual De Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
4.3 Remote Network Configuration (WAN Mode)
4.3.1 Before you start the remote network configuration, please make sure that the camera is
successfully added to the APP and online status in the LAN mode.
4.3.2 Use Android APP for Configuration
Step 1: Launch the "Plug & Play" APP, tap "LAN", tap the arrow icon
, tap "Wi-Fi" to enter
the "Wi-Fi" setting page.
Step 2: Select "Use wifi" , tap "search", tap "
" to search for the available WIFI hotspots.
Step 3: Select a desired WIFI hotspot to enroll the camera in.
Step 4: Tap "OK" to complete the remote network configuration and the camera will reboot
automatically. The blue indicator light will keep flashing slowly when the camera is rebooted
successfully.
4.3.3 Use IOS APP for Configuration
Step 1: Launch the"P2PCamViewer" APP, tap "Local cameras" , tap icon
, enter "Wire-
less settings" page.
Step 2: Enable "WiFi", tap
to search for available WIFI hotspots.
Step 3: Select a desired WIFI hotspot to enroll the camera in.
Step 4: Tap"Done" to complete the remote network configuration and the camera will reboot
automatically. The blue indicator light will keep flashing slowly when the camera is rebooted
successfully.

Publicidad

Tabla de contenido
loading

Tabla de contenido