Network Configuration - Wiseup WIFI40 Manual De Usuario

-1x USB Cable
-1x DC 5V 2A Power Adapter
-1x Card Reader
-1x Lanyard
-1x Holder
-1x 16GB Micro SDHC Class 10 SD card (fitted into the Micro SD card slot already)
III. Get Camera Ready
3.1 Before power on the camera, please make sure:
a. The camera is fully charged or connected to an external power source with the power adapt-
er provided.
b. A micro SD card has been formatted in advance and is securely fitted into the camera's SD
card slot.
Note: Please use a Micro SDHC Class 10 SD card for this camera.
3.2 Slide the power switch to the on position, both the red and blue indicator light will be turned
on simultaneously, then the red indicator light turns off and the blue indicator light starts flashing
slowly, indicating that the camera is ready for network configuration.
IV. Network Configuration
4.1 Search for "9527" in Google Play or APP Store, then download and install
"Plug&Play" or "P2PCamViewer" APP on your mobile device.
4.2 P2P or LAN Mode Configuration
4.2.1 Go to the WIFI or WLAN setting page on your mobile device, connect your mobile device
to the camera's WIFI hotspot. The SSID is "Q7", the default password is "12345678".