Style selections MTVS2547SWL Manual De Instrucciones página 12

ASSEMBLY INSTRUCTIONS
11. Attach trim pieces (S) to insert (P) with firebox
screws (PP).
Hardware Used
PP Firebox Screw
12. Slide insert (P) from the back of the mantel
assembly until the front of the insert (P) is
in line with the front of the mantel. Once the
insert (P) is in position and square at the front
of the mantel assembly, press the fireplace
insert brace (O) against the insert, making sure
not to cover any air vents. Once fireplace insert
brace (O) is snug, attach it to base (A) with (2)
25 mm screws (FF). Do not overtighten.
Hardware Used
FF
25 mm Screw
WARNING: You must attach the anti-tipping device to the mantel and the wall. This device is a safety
feature that will prevent the mantel from tipping over.
13. Attach one of the mounting brackets (II)
securely to the back top edge of the
mantel. Secure with 2 small screws (KK),
but do not overtighten.
Hardware Used
II Mounting Bracket
KK Small Screw
x 6
x 2
x 1
x 2
12
11
PP
S
S
P
12
FF
A
O
13
II
KK
Lowes.com