Iso Din Radio Provision With Pocket - Metra 99-7014 Instrucciones De Instalación

1. Mount the radio to the brackets
with screws included with radio.
(Figure A)
2. Mount the radio brackets to the
pocket with the screws supplied.
(Figure A)
3. Locate the factory wiring
harness and antenna plug in the
dash. Metra recommends using
the proper mating adapters from
Metra and/or AXXESS.
4. Mount assembly into the sub dash.
(Figure B)
5. Reassemble dash in reverse order
of disassembly using 99-7014 trim
panel instead of factory panel.
Dash Disassembly 99-7014

ISO DIN radio provision with pocket

(Figure A) (Figure B)
6