Technical Data - Teka HF LUX 60 4G AL NAT Instrucciones Para La Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GB_61401134_en.qxd 27.02.2015 14:52 Page 12

Technical data

COMMON FEATURES FOR ALL MODELS
WITH ELECTRIC HOTPLATES AND AUTO-
MATIC IGNITION
The supply voltage and frequency will be
as shown on the rating plate.
If an electric hotplate gets cracked, the
hob should be disconnected from the elec-
tricity current.
COMMON
FEATURES
MODELS WITH GAS BURNERS
Warnings:
a) Before installation, make sure that the
local supply conditions (the gas type and
pressure) are compatible with the applian-
ce's setup.
b) The setup conditions for this appliance
are written on the label (or the rating
plate).
c) This appliance should not be connected
to a device for removing combustion
products. It should be installed and con-
nected in compliance with the current ins-
tallation standards. Special attention
should be paid to the regulations applying
to ventilation.
A gas cooking appliance produ-
ces heat and moisture at the site where
it is installed. The kitchen should be
provided with suitable ventilation: natu-
ral ventilation sources should be kept
clear, a window opened, or an effective
mechanical ventilation system device,
such as a hood, installed.
The intense and prolonged use
of the appliance may call for comple-
mentary ventilation, such as opening a
window, or more efficient ventilation
such as increasing the power of the
FOR
ALL
mechanical ventilation if this exists.
Class 3 Hob.
Table 2
Country
Spain
Portugal
País
Category
II2H3+
II2H3+
12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hf lux 60 4g al butHf lux 50 4g al natHf lux 50 4g al butHlx 60 4g al natHlx 60 4g al butHf lux 50 4g al al ci nat ... Mostrar todo

Tabla de contenido