Publicidad
STEP 3
Align the tray over the top of
the pivot guide and support
arm. Insert the tray into the
corresponding attachments
and press firmly into place (See
Figure 3).
STEP 4
For the orientation of how the
piston is turned in order to
attach. Ensure the thin black
portion of the piston is facing
toward the cabinet opening
(See Figure 4).
STEP 5
Snap the piston onto the ball
studs (See Figure 4). The tray
will need to be approximately
halfway in the open position
when attaching.
STEP 6
Once the piston has been
attached, open and close the
unit a few times to ensure it
works properly. At this time,
the red piston case should
detach automatically.
INSTALLATION INSTRUCTIONS: THE CLOUD: BLIND CORNER ORGANIZER
FRONT VIEW
SNAP ONTO THE BALL STUD
FIGURE 3
FIGURE 4
SNAP ONTO THE BALL STUD
PRESS FIRMLY
INTO PLACE
11
Publicidad
