Publicidad
STEP 4
Place the guide track template
on your cabinet floor. Follow
the directions on the template
to orient the template
correctly. Secure template to
the floor with tape and punch
pilot holes with your awl and
rubber mallet (See Fig 4).
STEP 5
Using the provided support
arm screws, secure the support
arm to the cabinet side wall
(See Fig 5). At this time, insert
the plastic cap into the support
arm as shown.
#2
STEP 6
Using the provided guide track
wood screws, secure the guide
track to the cabinet floor (See
Fig 6).
#2
STEP 7
Slide the pivot guide onto the
guide tracks (See Fig 7).
IF YOU INTEND TO INSTALL THE SOFT-CLOSE KIT, TURN TO PAGE 10 AT THIS
STOP
TIME. OTHERWISE, PROCEED TO STEP 8 AND CONTINUE YOUR INSTALLATION.
STEP 8
Align the tray over the top of
the pivot guide and support
arm. Insert the tray into the
corresponding attachments
and press firmly into place
(See Fig 8).
INSTALLATION INSTRUCTIONS: THE CLOUD: BLIND CORNER ORGANIZER
ATTACH
SCREWS
FIGURE 6
ATTACH
SCREWS
FIGURE 4
FIGURE 5
INSERT CAP
FIGURE 8
PRESS FIRMLY
INTO PLACE
FIGURE 7
SLIDE PIVOT GUIDES HERE
STOP
3
Publicidad
