Publicidad
STEP 4
Place the guide track template
on your cabinet floor. Follow
the directions on the template
to orient the template
correctly. Secure template to
the floor with tape and punch
pilot holes with your awl and
rubber mallet (See Fig 4).
STEP 5
Remove the guide track
template and replace with the
telescoping shaft template.
Secure in place with tape and
punch your hole locations with
an awl and rubber mallet (See
Fig 5.1). Turn the template
upside down repeat for the
cabinet ceiling (See Fig 5.2).
STEP 6
Secure the top and bottom
telescoping shaft positioners
to the cabinet using the
positioner screws (See Figs 6.1,
6.2 and 6.3).
#2
STEP 7
Attach the telescoping shaft
to the bottom positioner first,
as shown in Figure 7. Now
attach the telescoping shaft to
the top positioner and use the
adjustment knob to attach and
secure to the top positioner.
INSTALLATION INSTRUCTIONS: THE CLOUD: BLIND CORNER ORGANIZER
FIGURE 5.1
FIGURE 6.1
POSITIONER
LOCATIONS
PLACE IN
BOTTOM
POSITIONER
FIRST
FIGURE 4
FIGURE 5.2
PUNCH
HOLES
MOVE
TEMPLATE TO
CEILING
FIGURE 6.2
SECURE TOP
POSITIONER
FIGURE 7
USE KNOB
TO LOOSEN
TELESCOPING
PORTION IN
ORDER TO
PLACE IN TOP
POSITIONER
FIGURE 6.3
SECURE
BOTTOM
POSITIONER
7
Publicidad
