I Cleaning The Impeller; I Replacing The Tracks - Polaris W 430 Manual De Instalación Y De Uso

3.3 I Cleaning the impeller

To avoid serious injury:
• Disconnect the cleaner from the power supply.
• Wear gloves when handling the impeller
• Loosen the screw on the grid (see fi gure
• Remove the grid carefully (see fi gure
• Wear gloves and pull on the impeller while holding it ti ghtly (see fi gure
which may be blocking the impeller.

3.4 I Replacing the tracks

• The tracks must be replaced by the retailer.
.
).
).
). Remove all debris (leaves, stones, etc.)
EN
16