Cleaning The Filter Canister - Polaris NEO EM27 Manual Del Propietário

4.6

Cleaning the Filter Canister

Always empty and clean the fi lter canister at the end of
each cleaning cycle.
WARNING
To avoid electric shock and other hazards which could
result in serious injury or death, disconnect (unplug) the
cleaner from the power source before performing any
cleaning and maintenance.
1. Unplug power to the cleaner at the control unit.
Unplug the control unit from the power source.
2. Press the PUSH 'N' GO
the fi lter canister handle.
3. Grasp the fi lter canister handle and lift up to
remove the fi lter canister.
Figure 7. Release Filter Canister Handle
Figure 8. Remove the Filter Canister
button (1) to release
®
1
2
4. Press two latches (1) and remove the fi lter
canister lid (2).
1
2
Figure 9. Remove Filter Canister Lid
5. Using a hose with clean water, rinse the
fi lter canister and lid to remove all debris.
Periodically, use mild soap to wash the canister
mesh and remove fi ne debris that can clog the
fl ow through the fi lter canister. Rinse thoroughly
with clean water.
Figure 10. Rinse the Filter Canister
6. Replace lid on the canister and then replace
canister back into the cleaner body.
Page 9